Archives
Archives
Does the vFan have the capacity to paint a mini bike frame (Honda mini trail size) or a bicycle frame?
The vFan will absolutely be the best option. For larger projects like this we recommend using the vFan with a standard plug in compressor. Otherwise our 150 feet of ENERGY will work fine but because the portable units are more designed for “on-the-fly touch-ups” you should buy an additional 2-3 units to interchange throughout the […]
Why is the vFan Airbrush superior to other spray systems?
The dual action vFan Airbrush allows for the user to control air flow and product output. This precision based vFan Airbrush is capable of atomizing coatings, paints, chemicals at nano size droplets giving ultra thin coatings or dispensing thicker coatings at a 1/16th” pin pattern to a 3″ fan pattern. Further the vFan works with […]
How to Apply Gelcoat?
DO NOT work in direct sunlight Remove rails, cleats, louvers, snaps, striping tape, etc. Remove seals from the edges of parts or fittings when doing a repair around that part or fitting. Clean repair area and all tools with acetone prior to application. Spray acetone to clean out Sprayer and/or vFan Airbrush. Duct tape off […]
What is patent pending regarding the vFan Kit? What puts it in a higher class than other similar kits?
The patent application is focused around the functionality of the system. Because its only a patent pending we have to be careful discussing too much detail. You wont find another system like this in the market. key features: Comes with fan aircap and detail aircap No compressor is needed but works very well with them. […]
Why isn’t paint sticking to metal or plastic?
Usually when paint isn’t sticking to a surface, it is because the paint has nothing to “grab” onto. Scuffing up the glossy finish with 1,000-grit sandpaper or lightly with an SOS pad will help. Adhesion promoter will also help. After scuffing, wipe the surface with a degreaser.
Should i soak my vFan Airbrush to clean it?
Soaking the parts of the vFan airbrush that have paint on them in thinner is ok. But soaking the whole airbrush, you should only do this for a few minutes as the thinner will remove the lubrication that helps all the parts move smoothly. You are better off cleaning the airbrush with cleaning solution or […]